A subwoofer is a crucial component of your audio device that produces low-frequency sound. The low-pitch audio frequency is referred to as the bass.

Audio is made up of different frequencies. The primary speakers are ideally suited for the replication of high and mid-range frequencies.

If the traditional speakers attempt to relay different sound signals, the effect will be a distortion of the voice. Thus try to get a 10 or 12-inch subwoofer.

Conventional speakers cannot accommodate low-frequency sound adequately because this particular signal needs a lot of power and the speakers are not up to the challenge.

There are many types of subwoofers available on the market.

Home Subwoofer Specifications

You are recommended to do some research on difference between 10-inch and 12-inch subwoofer before buying one. The post would concentrate on a number of tips when you first buy a subwoofer.

Active and Passive Subwoofer

Subwoofers come in two basic types, active and passive. A passive subwoofer requires the control of an external amplifier.

It is primarily used in car audio systems as a large speaker or as a group of speakers in a box. An electric subwoofer, also known as a powered subwoofer, has a built-in amplifier.

It is got its own power connection. There is no need for different wiring systems for working subwoofers.

Subwoofers range in size from 4 inches to 20 inches. Big subwoofers provide more bass, but they are heavy.

If you want a compact apartment subwoofer, a 20-inch unit would be a fine size. Small subwoofers are comfortable and have sufficient bass.

You may find in-wall subwoofers built into walls or ceilings. Such kinds of subwoofers are acceptable because they save room on the board.

Driver Scale

A Subwoofer driver is a system that transforms electrical energy into sound waves. Sometimes the driver himself is referred to as the speaker, particularly when a single driver is installed in the enclosure.

Big drivers are delivering heavy bass. A 10 or 12-inch driver scale is a good size because it is capable of reproducing the lowest frequency tone.

Form of Enclosure

A subwoofer enclosure is a cabinet in which speakers and other related devices, such as amplifiers and crossover circuits, are installed.

The enclosures are of different designs. The purpose of the enclosure is to prevent the sound waves produced at the rear of the driver’s diaphragm from interfering with the sound waves created at the front.

Any interference between the two waves can cause the initial signal to be blurred. The construction of the cabinet has an impact on the performance of the subwoofer. Base reflex and acoustic suspensions are the most common setups.